h4831 vs h4831sc Secrets

h4831 vs h4831sc Secrets

Blog Article

I picked up a 50ct. box of 160 Nosler Accubonds, but I'm hesitant to burn the powder and projectiles on workup when all I have is fifty bullets. But I actually need to locate a bullet during the a hundred and sixty course that my older rifle likes.

Certainly, the Hodgdon tech wouldn't endorse my mixing of different whole lot figures, but I believe I realize why. It's a litigation-driven earth, and many fool would absolutely deduce that he could blend H380 and H110 and think of his personal customized combination of powder. What a earth.

That you are right They may be a similar the SC is short Lower so it meters superior, I do not Consider you can obtain just normal 4831 any longer

Operate your load up with the particular powder (sc or typical) and great deal you are utilizing though. Exact burn off price does not imply it is going to behave "precisely" the identical. I've witnessed more than a hundred fps difference between sc and mil-surp lots of H4831.

Yup or it is not going to perform nicely. And Considering that the OP provides a load making use of Varget I would attempt to find another person to trade with. May well think of a earn get problem.

I have applied H4831 and H4831SC in my 260 Rem without h4831sc load data having big difference. The only thing is definitely the brief Minimize provides a little more space. Good luck!gun)

I am using it with a 210 Berger. In my rifle, H1000 was not as correct. RL22 did properly but I used to be just a little worried about temp stability. I feel I am at seventy two grains and get close to 2850ish fps

Like mentioned previously mentioned, identical stuff. Everything differs is the dimensions from the kernels. I did hear someplace that they h4831sc load data are going to only make the SC Later on. I have no idea if which is accurate or not but would make sense to me. I exploit SC due to the fact that is certainly what I found in the eight lb jug and it works.

WA I would advise a h4831sc slower burner that may give superior circumstance density like H1000 or IMR 7977, particularly when you're loading heavies long.

Liberalism; The extremely hard however accepted notion that it's fully possible to choose up a turd from the cleanse conclude.

This is certainly an more mature thread, you might not receive a reaction, and will be reviving an previous thread. Remember to take into consideration creating a new thread.

The "SC" stands for Short Reduce. I haven't noticed a difference between both powder dut I do not Believe I might mix them.

Though IMR 4831 and H4831SC are distinctive powders, you'll find that in lots of occasions, where by one of these is listed the other will likely be at the same time. Also, you will discover there is a reasonably dependable relationship in between them in regards to outlined loads.

I discovered that my 7mag a hundred and sixty partitions had been sub MOA with 4831sc with lower to min charges. I’m speaking 2700 (probably 2800) fps, it absolutely was a reduced 60s grain cost in the Norma circumstance. Not what I had been seeking, but exact nonetheless.